~95% / 5%
Cold fiber ablation
Most of the pulse energy vaporises tissue; only a thin residual heat zone remains, which can mean less prolonged erythema than high-coagulation CO2 in comparable settings.
4.9(1,200 reviews)
UltraClear Laser Treatment in Dubai
Acclaro’s 2910nm cold fiber laser — high ablation, low residual heat — with Clear, Silk, and Ultra modes plus Laser-Coring for scars and deeper lines.
2910nm fiberFDA K233803Laser-CoringClear · Silk · Ultra
Acclaro Medical
3DIntelliPulse™
UltraClear is a 2910nm mid-infrared fiber laser that sits near a water-absorption peak, so tissue is vaporised with about 95% ablative efficiency and only around 5% residual heat. That “cold” ablation profile, plus 3DIntelliPulse pulse shaping, is designed to resurface wrinkles, scars, texture, and pigment with less thermal collateral damage than hotter CO2 platforms. FDA 510(k) K233803 covers those indications. Modes range from Clear and Silk to deeper Ultra, with Laser-Coring for focal rhytids and scars.
About Our UltraClear
What is UltraClear?
UltraClear (Acclaro Medical) is a 2910nm cold fiber laser. The wavelength is strongly absorbed by water, which lets the beam ablate microscopic columns of epidermis and dermis while depositing little leftover heat — typically cited as ~95% ablation and ~5% residual thermal energy.
3DIntelliPulse controls pulse geometry in three dimensions so depth and coagulation can be tuned independently. Laser-Coring removes a core of tissue rather than only fractionating it, which is used for deeper wrinkles and atrophic scars. Clear, Silk, and Ultra modes step from light epidermal refresh to more intensive resurfacing. Treatments at Yoyime Clinic are performed by trained specialists.
Inside our treatment technology
What Makes UltraClear Unique?
UltraClear is defined by a 2910nm water peak, a cold ablation ratio, and a dedicated Laser-Coring mode — not a conventional CO2 or Er:YAG clone.
3DIntelliPulse
Independent depth and heat
Pulse architecture is shaped in three dimensions so ablation depth and coagulation can be adjusted separately for Clear, Silk, or Ultra protocols.
K233803
Laser-Coring for scars & lines
Laser-Coring physically cores tissue to address deeper wrinkles and scars — an FDA-cleared approach (K233803) alongside texture and pigment indications.
Science-backed process
How Does UltraClear Work?
2910nm energy is absorbed by water, ablating microscopic columns while 3DIntelliPulse sets how much heat is left behind.
2910nm
Wavelength
~95% / 5%
Ablation / heat
K233803
FDA 510(k)
1
Mode selection
Clear, Silk, or Ultra is chosen according to how much surface reset you need and how much recovery you can take. Laser-Coring can be added on focal lines or scars.
2
Water-peak ablation
The 2910nm fiber beam vaporises tissue in a fractional pattern. High water absorption keeps residual heat to about 5% of the pulse energy.
3
3DIntelliPulse control
Pulse width and geometry are shaped so depth and coagulation match the zone — lighter on eyelids, deeper on cheeks or scar beds.
4
Repair and remodeling
Ablated columns close as new epidermis migrates in. Collagen remodels over weeks; Laser-Cored foci contract as the defect fills.
UltraClear Treatment Areas
Targeted ultrasound lifting across the face, neck, and décolletage
Full face
Fractional resurfacing for photoaging, texture, pores, and dyschromia using Clear, Silk, or Ultra.
Periocular
Controlled cold ablation for crepey eyelid and crow’s-feet skin when a lighter thermal load is preferred.
Neck
Addresses crepe and sun damage on the neck with conservative density and depth.
Acne & surgical scars
Laser-Coring and fractional passes to blend atrophic and textural scars.
Hands
Refines lentigines and thinning dorsal-hand skin with a modest recovery plan.
Benefits of UltraClear Treatment
- 2910nm cold fiber laser near the water-absorption peak
- Approximately 95% ablation with about 5% residual heat
- 3DIntelliPulse pulse shaping for independent depth and coagulation
- Clear, Silk, and Ultra modes from light refresh to deeper resurfacing
- Laser-Coring for focal wrinkles and atrophic scars
- FDA 510(k) K233803 for wrinkles, scars, texture, and pigment
- Fractional pattern leaves untreated bridges for faster re-epithelialisation
- Can be planned as a standalone reset or combined with other Yoyime modalities when advised
Who is a Good Candidate for UltraClear?
Have wrinkles, textural roughness, pigment, or atrophic scars that need true resurfacing
Want ablative results with a colder thermal profile than classic CO2
Can take several days of social downtime depending on mode
Need focal Laser-Coring on deep lines or scar pits rather than a uniform peel only
Active infection, recent isotretinoin, or unrealistic “no downtime, surgical result” expectations are reasons we may recommend a different plan.
Original Yoyime Clinic services this technology can support. Our specialists will recommend the right option for you.
UltraClear Services
Facial Pigmentation Laser Treatment
- Treatment uses targeted laser technology to break down melanin deposits into tiny fragments.
- The result is a brighter, even complexion with improved texture and collagen stimulation.
Advanced Stretch Mark & Scar Care
- Clinical assessment before treatment
- Personalised contouring protocol
Skin Tag Removal
- A dermatological procedure used to eliminate (acrochordons) benign skin growths known as skin tags.
- The procedure is quick, minimally invasive and performed under local anesthesia or numbing.
Mole Removal
- This procedure is used to remove benign or suspicious skin growths known as moles (nevi).
- The removal procedure will be determined following the clinical assessment of the mole.
Related concern pathways
Concerns treated with UltraClear
Sun Damage
View Concern
Hyperpigmentation
View Concern
Fine Lines & Wrinkles
View Concern
Enlarged Pores & Open Pores
View Concern
Dull Skin
View Concern
Wrinkle and texture refinement
Scar blending after Laser-Coring
Real results
UltraClear Before & After Results
Smoother texture and refined lines after UltraClear resurfacing at Yoyime Clinic.
12–18
Months results
1
Session typical
0
Days downtime
UltraClear Treatment Cost in Dubai
Personalised quote after free consultation
Cost depends on mode (Clear, Silk, Ultra), whether Laser-Coring is added, and the surface area treated.
Yoyime Clinic provides a personalised quote after skin assessment.
Yoyime Clinic Dubai
UltraClear at Yoyime Clinic in Dubai
Our specialists match 2910nm settings to your anatomy so you get the ablation you need without unnecessary residual heat.
Book a complimentary consultation to review Clear, Silk, Ultra, and Laser-Coring options.
UltraClear in Dubai: FAQs
Common Queries & Answers
2910nm is absorbed so strongly by water that most of the pulse energy ablates tissue (~95%) and only a thin heat zone remains (~5%). That is the “cold” ablation profile versus hotter CO2 coagulation.
They are intensity modes. Clear is a lighter epidermal refresh, Silk is an intermediate resurfacing, and Ultra is a deeper fractional pass. Your specialist selects one (or a blend) based on goals and downtime.
Laser-Coring removes a core of tissue at selected points — used for deeper wrinkles and atrophic scars — rather than only fractionating the surface uniformly.
Yes. FDA 510(k) K233803 covers treatment of wrinkles, scars, texture, and pigment with this platform.
Clear may mean a few days of redness and bronzing. Silk and Ultra, and Laser-Coring, typically need more social downtime as the columns re-epithelialise. Exact timing is set at consultation.
No. CO2 is 10600nm with more residual heat. UltraClear is a 2910nm fiber laser designed for high ablation efficiency and low leftover thermal damage.
Pricing is quoted after consultation based on mode, zones, and whether Laser-Coring is included.
